XdkWrl: Cone Class Reference

6.11 Cone

The Cone node specifies a cone which is centred in the local coordinate system and whose central axis is aligned with the local Y-axis. The bottomRadius field specifies the radius of the cone's base, and the height field specifies the height of the cone from the centre of the base to the apex. By default, the cone has a radius of 1.0 at the bottom and a height of 2.0, with its apex at y = height/2 and its bottom at y = -height/2. Both bottomRadius and height shall be greater than zero. Figure 6.3 illustrates the Cone node.

Figure 6.3 -- Cone node

The side field specifies whether sides of the cone are created and the bottom field specifies whether the bottom cap of the cone is created. A value of TRUE specifies that this part of the cone exists, while a value of FALSE specifies that this part does not exist (not rendered or eligible for collision or sensor intersection tests).

When a texture is applied to the sides of the cone, the texture wraps counterclockwise (from above) starting at the back of the cone. The texture has a vertical seam at the back in the X=0 plane, from the apex (0, height/2, 0) to the point (0, -height/2, -bottomRadius). For the bottom cap, a circle is cut out of the texture square centred at (0, -height/2, 0) with dimensions (2 × bottomRadius) by (2 × bottomRadius). The bottom cap texture appears right side up when the top of the cone is rotated towards the -Z-axis. TextureTransform affects the texture coordinates of the Cone.

The Cone geometry requires outside faces only. When viewed from the inside the results are undefined.

Constructor & Destructor Documentation

Cone ( const char * name = "" )

Construct a node with all its fields set to default value, which is equivalent to the code below:

  bottomRadius = 1;
  height = 2;
  side = true;
  bottom = true;

Member Function Documentation

wrl::Node * duplicate ( std::map< const Node *, Node * > & ) const [virtual]

Implements Node.

wrl::Node * duplicate ( ) const [virtual]

Returns a deep copy of this node, that is a fully independant node with all children (if any) also copied. This is mainly useful for instanciating protos.

Implements Node.

wrl::Node::EventInHandle eventIn ( const unsigned int i ) [virtual]

Return a handle on the i th event in of the node or a "unknown" typed handle if there is no such node. emarks This class has no eventIn. This function is useful, with nbEventsIn() if you want to traverse all events in of a Node.

Implements Node.

wrl::Node::EventInHandle eventIn ( const std::string & n ) [virtual]

Return a handle on the event in named n of the node or a "unknown" typed handle if there is no such event. Valid names are:

Implements Node.

wrl::Node::EventOutHandle eventOut ( const unsigned int i ) [virtual]

Return a handle on the i th event out of the node or a "unknown" typed handle if there is no such node. Here is how i is related to fields: This function is useful, with nbEventsOut() if you want to traverse all events in of a Node.

Implements Node.

wrl::Node::EventOutHandle eventOut ( const std::string & n ) [virtual]

Return a handle on the event out named n of the node or a "unknown" typed handle if there is no such event. Valid names are:

Implements Node.

wrl::Node::FieldHandle field ( const unsigned int n ) [virtual]

Return a handle on the i th field of the node or a "unknown" typed handle if there is no such node. Here is how i is related to fields:

0 : bottomRadius
1 : height
2 : side
3 : bottom This function is useful, with nbFields() if you want to traverse all fields of a Node.

Implements Node.

wrl::Node::FieldHandle field ( const std::string & n ) [virtual]

Return a handle on the field named n of the node or a "unknown" typed handle if there is no such field. Valid names are:

bottomRadius
height
side
bottom

Implements Node.

bool isSetToDefaultValue ( const unsigned int i ) const [virtual]

Implements Node.

unsigned int nbEventsIn ( ) const [inline, virtual]

Returns the number of events in for this node type.

Implements Node.

unsigned int nbEventsOut ( ) const [inline, virtual]

Returns the number of events out for this node type.

Implements Node.

unsigned int nbFields ( ) const [inline, virtual]

Returns the number of fields (exposed or not) for this node type.

Implements Node.

const char * typeName ( ) const [inline, virtual]

Returns "Cone". Useful for printing.

Implements Node.


Public Member Functions
	Cone (const char *name="")
virtual	~Cone ()
virtual unsigned int	nbFields () const
virtual FieldHandle	field (const std::string &n)
virtual FieldHandle	field (const unsigned int i)
virtual bool	isSetToDefaultValue (const unsigned int i) const
virtual unsigned int	nbEventsIn () const
virtual EventInHandle	eventIn (const std::string &n)
virtual EventInHandle	eventIn (const unsigned int i)
virtual unsigned int	nbEventsOut () const
virtual EventOutHandle	eventOut (const std::string &n)
virtual EventOutHandle	eventOut (const unsigned int i)
const char *	typeName () const
virtual Node *	duplicate () const
virtual Node *	duplicate (std::map< const Node , Node > &) const
Public Attributes
Fields
A property or attribute of a node. Each node type has a fixed set of fields. Fields may contain various kinds of data and one or many values. Each field has a default value.
SFFloat	bottomRadius
SFFloat	height
SFBool	side
SFBool	bottom

Cone Class Reference
[Standard Node Types]

Public Member Functions

Public Attributes

Detailed Description

6.11 Cone

Figure 6.3 -- Cone node

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation

Cone Class Reference [Standard Node Types]

Public Member Functions

Public Attributes

Detailed Description

6.11 Cone

Figure 6.3 -- Cone node

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation

Cone Class Reference
[Standard Node Types]